MOTORIZED WORKSTATION AES OSCAR | BESLA
• ESD version for discharging electrostatic charges
• Electromotive height adjustable from 720 - 1220 mm (with 3-fold memory function)
• Traverse speed 23 mm/s
• HV control panel with digital display on the right below the working level
• Synchronized 4-fold lifting mechanism with a lifting force of 3600 N
• Table top with appealing 70 mm postforming edge in front with perforated metal paneling in the footwell
• Rear, accessible from above, large volume horizontal cable channel
• Horizontal cable duct for holding electrical components with self-retaining, split cable duct flap
• Cable duct flap with brush strip for cable entry
• Cable duct and cable duct flap antistatic coated
• Dust protection in the area of the cable duct through brush strip
• Prepared for power strip installation with 2 large-volume energy chains on the back for vertical cable routing
• Left and right back of the table leg with vertical cable channel
• Rear table legs can be extended at any time, to accommodate
• Vertical cable duct, luminaires, rapomos, small distribution boards, flat screens and shelves
INNOVATIVE LIFT MECHANICS
• Very quiet running
• Overload protection with individual current limitation
• Soft start and stop function
• Freely programmable height positions
• Anti-collision
• Programmable stopover and slow mode possible when driving into the end position
• Error detection by special codes, creation of a remote diagnosis
• Maintenance-free lifting mechanism
• Service-friendly lifting column table
All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable.
However we make no warranties expressed or implied and assume no liability regarding any use of this information.